-
Инструкции по эксплуатации
1
TC Electronic NM-1 Nova Modulator инструкция по эксплуатации
(204 страницы)
-
Тип:
ZIP -
Размер:
6.95 MB
Просмотр
На NoDevice можно скачать инструкцию по эксплуатации для TC Electronic NM-1 Nova Modulator. Руководство пользователя необходимо для ознакомления с правилами установки и эксплуатации TC Electronic NM-1 Nova Modulator. Инструкции по использованию помогут правильно настроить TC Electronic NM-1 Nova Modulator, исправить ошибки и выявить неполадки.
Скачать
NM-1
NOVA Modulator
USER’S MANUAL
NOVA System
User’s Manual
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with an arrowhead symbol within
an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
Warning!
• To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture and objects filled with
liquids, such as vases, should not be placed on this
apparatus.
• This apparatus must be earthed.
• Use a three wire grounding type line cord like the one
supplied with the product.
• Be advised that different operating voltages require the use
of different types of line cord and attachment plugs.
• Check the voltage in your area and use the correct type.
See table below:
Voltage Line plug according to standard
110-125V UL817 and CSA C22.2 no 42.
220-230V CEE 7 page VII, SR section
107-2-D1/IEC 83 page C4.
240V BS 1363 of 1984.
Specification for 13A fused
plugs and switched and
unswitched socket outlets.
• This equipment should be installed near the socket
outlet and disconnection of the device should be easily
accessible.
• To completely disconnect from AC mains, disconnect the
power supply cord from the AC receptacle.
• The mains plug of the power supply shall remain readily
operable.
• Do not install in a confined space.
• Do not open the unit – risk of electric shock inside.
Caution:
You are cautioned that any change or modifications not
expressly approved in this manual could void your authority to
operate this equipment.
Service
• There are no user-serviceable parts inside.
• All service must be performed by qualified personnel.
a
EMC / EMI & CERTIFICATE OF CONFORMITY
EMC/EMI
This equipment has been tested and found to comply
with the limits for a Class B Digital device, pursuant to
part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in residential
installations. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
For Customers in Canada:
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Certificate of Conformity
TC Electronic A/S, Sindalsvej 34, 8240
Risskov, Denmark, hereby declares on own
responsibility that the following product:
NOVA System
— Effects Processor for electric guitars
that is covered by this certificate and
marked with CE-label conforms with
following standards:
EN 60065 Safety requirements for mains
(IEC 60065) operated electronic and
EN 55103-1 Product family standard for
EN 55103-2 Product family standard for
With reference to regulations in following
directives:
73/23/EEC, 89/336/EEC
related apparatus for household
and similar general use
audio,video, audio-visual and
entertainment lighting control
apparatus for professional
use. Part 1: Emission.
audio, video, audio-visual and
entertainment lighting control
apparatus for professional
use. Part 2: Immunity.
Issued in Risskov, January 2008
Mads Peter Lübeck
Chief Executive Officer
b
TABLE OF CONTENTS
INTRODUCTION
Safety Instructions . . . . . . . . . . . . . . . . . . . . . .a
EMC/EMI & Certificate of Conformity . . . . . . . .b
Table of contents . . . . . . . . . . . . . . . . . . . . . . .3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
OPERATION
NOVA System – Front panel . . . . . . . . . . . . . .6
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
NOVA System – Rear panel . . . . . . . . . . . . . . .9
SETUPS
Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . .10
NOVA System in a an effects loop . . . . . . . . .11
MENUS
Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Boost Function . . . . . . . . . . . . . . . . . . . . . . . .15
Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
The Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
EQ and Noise Gate
EQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Noise Gate . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Modulation — Mod
Phaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Tremolo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Panner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Chorus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Flanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Vibrato . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Modulation — Pitch
Detune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Whammy . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Octaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Pitch Shifter . . . . . . . . . . . . . . . . . . . . . . . . . .39
Intelligent Pitch Shifter . . . . . . . . . . . . . . . . . .40
Delay Types
Common Delay Parameters . . . . . . . . . . . . . .41
Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
PingPong . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Dual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Spillover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
EFFECTS
Drive
Overdrive . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Compression
Sustaining . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Percussive . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
TC Electronic, Sindalsvej 34, DK-8240 Risskov – info@tcelectronic.com Manual revision 1.2 – SW – V 1.10
Reverb Types
Common Reverb Parameters . . . . . . . . . . . . .44
Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Hall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
APPENDIX
Technical Specifications . . . . . . . . . . . . . . . . .46
English Version
Prod. No: E60508712
3
INTRODUCTION
NOVA System — All-in-One Extravaganza
The Audible Choice
NOVA System is the complete, floor-based effects solution for the dedicated guitar player who knows quality when he
sees it. Its unique inclusion of an all-analog distortion/overdrive section under preset and expression control makes it the
perfect choice whether you want to trim down your rack setup, step up from your pedal patchwork or simply just want the
ultimate combination of operational simplicity and audio superiority.
Add to this an array of effects taken straight from the king of floor-based processors; G-System and you have top-notch
compression, EQ, noise gate, modulation, pitch, delay and reverb right at your feet. All you need is a guitar and an amp
and you’re good to go – first class.
Genuine, Analog Drive Circuit
What makes NOVA System so remarkably different is the NDT™ — NOVA Drive Technology — a unique, new drive and
distortion circuit that gets you the best of both worlds: World-class analog distortion and overdrive with digital control. This
is the real deal – no modeling. While the NDT™ is 100% analog and physically separated from the digital effects, its
control potmeters are digital. This way you can tweak, store and recall as many drive settings as you want — you can even
hook up an expression pedal and control the amount of distortion in real-time. Its wide gain range covers your every need
from light breakup to heavy distortion.
Top-notch Effects
Equipped with TC branded quality effects from delays
and reverbs to compressor, EQ and modulation, NOVA
System is the obvious all-in-one solution for any guitarist
who wants setup simplicity without sacrificing tonal
fidelity. All neatly programmable and storable in 60 user
presets. Its 30 factory presets give you a demonstration
of just what this unit provides; great sound quality and an
immense versatility of effects combinations – all
designed to get you started right out of the box.
The current manual revision number is found at the bottom of page 3.
Latest manual revision can always be downloaded via www.tcelectronic.com.
To seek additional information and support please visit TC Support interactive
that also can be accessed via www.tcelectronic.com
Features
• All-analog overdrive and distortion under preset and
expression control.
• 6 effect blocks taken straight from G-System:
— Compression
— EQ + Noise Gate
— Modulation
— Pitch
— Delay
— Reverb
• 30 factory and 60 user presets
• Two footswitch layouts: preset and pedal
• Hi-Z and balanced input + balanced stereo outputs
• Optional G-Switch for added control
5
OVERVIEW
6
OPERATION
1 — Effects edit / Select buttons
Press once to enter edit mode for the current effect.
Press again to toggle between the different effect types.
Press and hold to exit the effects edit mode without
saving.
2 — Variations
For each selected effect type, 4 instant variations can be
stored. When creating new presets this function makes is
very easy to combine your favorite reverbs with your
favorite compression settings etc.
Example:
— Press COMP edit to enter the compression block.
— Edit the compression settings using encoders A-D.
— Now press and hold VARIATION key #1 to save this
compression setting as one of your favorites. Note
that the preset is not stored at this point, you have
simply set up a favorite compression setting.
— Recall a different preset using the preset keys where
you would like to apply this compression.
— Press COMP followed by VARIATION key #1.
— Your favorite compression setting #1 is now recalled
into the current preset.
The VARIATION key LEDs
When a VARIATION key LED is lit you have previously
stored a variation with that key.
To delete a variation
Press and hold “FACTORY DEFAULT” while pressing
one of the VARIATION keys 1-4. This will delete the
variation stored with that key.
3 — Factory Default
TC Electronic has predefined factory default settings for
each algorithm. Press FACTORY DEFAULT to recall the
default settings for the currently selected algorithm.
Example:
Assume that you have a very nice preset with a nice
:
:
combination of compression, EQ, mod and maybe delay
settings. However, you feel that you have edited the
reverb parameters to a point where you find yourself a bit
lost. — What would TC Electronic suggest?
— We assume that you are in reverb edit, thus the
REVERB EDIT LED is lit.
— Press FACTORY DEFAULT.
Note that there is a factory default setting for each
effect sub-type.
4 — Edit A to D
EDIT encoders A to D is used to adjust parameters.
5 — Tuner Indications
In Tuner mode this section of the display indicates
whether the input note is above or below correct pitch.
6 — Store
Storing a preset can be done in two ways. We call them
“Quick store” and “Normal store”. “Quick store” is
typically used when you have made changes to a preset
and want to store the preset with the same name at the
same location. “Normal store” is used if you want to
change preset location and maybe the name as well.
Quick store
preset is now stored at the current location.
Normal Store — press STORE once:
Now the following controls are available:
— Encoder A selects preset location
— Encoder B selects preset name characters
— press and hold STORE for 2 seconds. The
If you are trying to store a factory preset using
“Quick store”, you will automatically be directed to
“Normal store” mode.
7
OPERATION
— Encoder C changes characters
— Encoder D selects recall, delete or store mode
When selections are made press STORE to confirm.
7 — Levels
Output levels can be set for each preset. All other
parameters in the levels menu are “global” parameters
and do not change with presets.
All preset parameters are marked with a “P” in the
right side of the display.
8 — MENU button
Press to enter the following menus:
— Routing
— Pedal
— Modifiers
— MIDI
— Utility
The menus are described in later chapters of this
manual.
9 — Effect status LEDs
The LEDs indicate which effect is selected in each block.
10 — MOD
On/off switch for the modulation block.
Secondary function
Press and hold to increase preset bank.
:
13 — TAP (Tempo) & Hold for TUNING
This switch has two functions.
Tap Tempo
By tapping the switch you enter the global tempo for
NOVA System. This tempo can be used for delay and
modulation effects.
Tuning
Press and hold to enter Tuner mode. Per default the
outputs are muted when in Tuner mode, but via the
Tuner menu chose between setting the “Tuner Out” to
mute or on. The Tuner parameters are automatically
accessible when Tuner mode is accessed.
14 — PITCH
On/off switch for the Pitch block.
Secondary function
Press and hold to decrease preset.
15 — REVERB or PRESET 1
In Pedal mode this switch acts as an on/off switch for the
Reverb.
In Preset mode you may press this switch to recall preset
#1 in the current bank.
16 — COMP or PRESET 2
In Pedal mode this switch acts as an on/off switch for the
Compressor.
:
:
:
11 — DELAY
On/off switch for the Delay block.
12 — BOOST
On/off switch for the Boost function. different boost levels
can be set for individual presets from 0 to 10 dB.
8
In Preset mode you may press this switch to recall preset
#2 in the current bank.
17 — DRIVE or PRESET 3
In Pedal mode this switch act as an on/off switch for the
Drive section. In Preset mode you may press this switch
to recall preset #3 in the current bank.
REAR PANEL VIEW
1 — Drive Input
Input for guitar. Use this input to utilize the programmable
analog drive section of NOVA System.
Connection type: 1/4” jack.
2 — Line Input
In case you want to use the NOVA System in an effects
loop of an amp, the “Effects Loop Send” should be
connected to the NOVA System Line In. Then the NOVA
System pre-amp section is bypassed and you use the
preamp section of your amp for drive.
3/4 — Balanced Outputs
Balanced outputs on 1/4” TRS jack. Use the left output if
you do not play in stereo and connect to a single amp.
5 / 6 / 7 — MIDI In / Thru / Out
Standard MIDI interface.
8 — Pedal In
Several types of external pedals can be connected and
used to control parameters.
— Connect a G-Switch for preset change and thereby
utilize all 8 switches on NOVA System as effects
bypass switches.
— Connect an expression control e.g. volume.
For perfect response when using an expression
pedal, the pedal must be calibrated. This is done via
the pedal menu.
— Via the pedal menu you can set up which parameter
the expression pedal should control.
9 — Power In
The switchmode power-supply accepts from 100 to 240
VAC.
9
TYPICAL SETUPS
Basic setup
This is a typical basic setup combining NOVA System
with one combo amp (or two for stereo) running a clean
channel. All effects and overdrive/distortion are
generated by NOVA System. A G-Switch (optional) is
connected and the NOVA System is then automatically in
stomp mode. Presets are then recalled using the GSwitch.
Connections
• Connect your guitar to the NOVA System’s Drive
input
• Connect Left output to a guitar amp running a clean
channel
• Connect the right output to a second guitar amp for
stereo (optional)
• Connect G-Switch (optional) to the pedal input
pedal input
10
Basic settings
• Set input sensitivity via the Levels menu
With a G-Switch connected
• Activate/deactivate effect blocks pressing the effects
switches
• Change presets using G-Switch
With no G-Switch connected
• Select the Footswitch parameter in the Utility menu
and select Pedal (stomp) or Preset mode
• Select preset — if in preset mode
• Activate/deactivate effect blocks pressing the effects
switches
:
:
NOVA System in an effects loop
TYPICAL SETUPS
In this setup we use the preamp section of your combo
amp to generate the drive. We use the Line input on the
NOVA System and thereby bypass the NOVA Systems
drive section. An expression pedal is connected to pedal
in for real-time control of e.g. volume.
Connections
• Connect guitar to the input of the combo amp.
• Connect the effects loop “send” of the amp to NOVA
Systems Line input.
• Connect left output to the effects loop return (=power
amp in) of your amp. For a stereo setup connect the
NOVA System right output to the effects loop return
(power amp in) of the other amp.
• Connect an expression pedal to the NOVA System
Pedal in.
Basic settings
• Set input sensitivity via the Levels menu according to
the highest pedal level
• Select the Footswitch parameter in the Utility menu
and select Pedal (stomp) or Preset mode
• Select preset (if in preset mode)
• Activate/deactivate effect blocks pressing the effects
switches.
• Calibrate the expression pedal via the pedals menu
• Assign parameters to the expression pedal via the
Pedal menu
11
MENU — ROUTING
Routing
NOVA System has three ways of routing the chain of effects: Serial, Semi Parallel and Parallel.
Basics
• Press MENU
• Select Routing using encoder D
• Press MENU to confirm
• Set values using encoders A, B and C
• Change pages using encoder D
• Confirm by pressing MENU
• Exit by pressing MENU again
Serial
The Serial routing connects all effect blocks “in a straight line”. This means that each effect block affects the following
effect(s).
If a delay with a long delay time is used in combination with a reverb, you may find the added reverb on the delay
repeats disturbing. In that case, use either the Semi Parallel or Parallel routing.
12
MENU — ROUTING
Semi Parallel
The Semi Parallel routing connects most effect blocks serially, but the reverb and delay blocks are now connected in
parallel. Consequently, the delay and reverb effects do not affect each other. This means that no reverb is added to the
delay repeats.
Parallel
In the Parallel routing, the same signal is fed to the input of the modulation, delay and reverb sections, and therefore
these effects will not affect each other.
13
MENU — LEVELS
Levels menu
Basics
• Press LEVELS to access
• Set values using encoders A, B and C
• Change pages using encoder D
Where nothing else is stated the range of the level
parameters is -100 dB to 0 dB.
Volume
Range: -100 dB to 0 dB
Level control that can be positioned either pre or post
effects processing. The position of the volume control is
set by the Position parameter (see also routing
schematic).
Input Gain
Range: 0 dB to 24 dB
Guitars have different output levels. So has pedals you
may have placed before the NOVA System. This is how
you set the correct gain.
• Switch on any pedal in your signal chain that is
placed prior to NOVA System and may boost the
signal
• Strum your guitar as hard as you do when you play
• Adjust the line gain until the “0” appears:
• Then back off a few dB:
Clipping indication
If you change the input gain considerably, e.g. by
switching to a different guitar or changing levels on a
pedal placed before the NOVA System, the input of the
NOVA System may be clipping. This is indicated by the
small dot in the far rightmost side of the numeric display:
Left Output & Right Output
Range: -100 dB to 0 dB
Individual level control for left and right outputs. These
levels can be set per preset.
Input
Range: Drive or Line
Selects the input. Select “Drive” if you have connected
your guitar to the Drive input and want to utilize the
NOVA Systems Drive effect block.
Select “Line” if you have connected your guitar to the
Line input. (see also routing schematic).
Volume Position
The Volume parameter is typically controlled by an
expression pedal. If you connect an expression pedal to
the pedal input the pedal will control this parameter per
default.
The Volume Position parameter defines where the
volume is controlled. The options are:
The volume is controlled right after the Drive section
Pre:
and before the effects. This allows for effects such as
Delay and Reverb to “hang”, even if you lower the level
using an expression pedal.
• The correct gain is now set and you have unity gain
through NOVA System.
14
The volume is controlled after the effects. This
Post:
means that the volume of the entire signal, including
effects, is controlled.
Loading…
Скачать файл PDF «TC electronic SDN BHD NOVA Modulator NM-1 Инструкция по эксплуатации» (1.12 Mb)
Популярность:
3654 просмотры
Подсчет страниц:
34 страницы
Тип файла:
Размер файла:
1.12 Mb
Google Ads:
Introduction
This End User License Agreement (the «Agreement») is a binding Agreement between you («End User,» «you»
or «your») and Empower Tribe HQ FZE («Company,» «we,» «us» or «our»). This Agreement governs the
relationship between you and us, and your use of the Company’s Software. Throughout this Agreement, End
User and Company may each be referred to as a «Party» or collectively, the «Parties.»
If you are using the Software on behalf of your employer or another entity (an «Organization») for whose
benefit you utilize the software or who owns or otherwise controls the means through which you utilize or
access, then the terms «End User,» «you,» and «your» shall apply collectively to you as an individual and to the
Organization. If you use or purchase a license or to or on behalf of an Organization, you hereby acknowledge,
warrant, and covenant that you have the authority to 1) purchase a license on behalf of the Organization;
2) bind the Organization to the terms of this Agreement.
By downloading, installing, accessing or using, you: (a) affirm that you have all of the necessary permissions and
authorizations to access and use; (b) if you are using the Software pursuant to a license purchased by an
organization, that you are authorized by that organization to access and use; (c) acknowledge that you have
read and that you understand this Agreement; (D) represent that you are of sound mind and of legal age
(18 years of age or older) to enter into a binding Agreement; and (e) accept and agree to be legally bound by
the terms and conditions of this Agreement.
If you do not agree to these terms, do not download, install, access, or use the software. If you have already
downloaded the software, delete it from your computing device.
The Software is licensed, not sold, to you by Music Tribe for use strictly in accordance with the terms
of this Agreement.
License
Subject to the terms of this Agreement and, if applicable, those terms provided in the License Agreement,
Music Tribe grants you a limited, non-exclusive, perpetual, revocable and non-transferable license to
download, install and use the Software a that you own or control.
Restrictions
You agree not to, and you will not permit others to:
- License, sell, rent, lease, assign, distribute, transmit, host, outsource, disclose, or otherwise commercially
exploit the Software or make the Software available to any third party - Modify, make derivative works of disassemble, decrypt, reverse compile, or reverse engineer any part of
the Software - Remove, alter, or obscure any proprietary notice (including any notice of copyright or trademark) of Music
Tribe or its affiliates, partners, supplier, or the licensors of the Software
Intellectual Property
All intellectual property rights, including copyrights, patents, patent disclosures and inventions (whether
patentable or not), trademarks service marks, trade secrets, know-how and other confidential information,
trade dress, trade names, logos, corporate names and domain names, together with all of the goodwill
associated therewith, derivative works and all other rights (collectively, «Intellectual Property Rights») that are
part of the Software that are otherwise owned by Music Tribe shall always remain the exclusive property of
Music Tribe (or of its suppliers or licensors, if and when applicable). Nothing in this Agreement grants you (or
any Organization) a license to Music Tribe’s Intellectual Property Rights.
You agree that this Agreement conveys a limited license to use Music Tribe’s Intellectual Property Rights, solely
as part of the Software (and not independently of it), and only for the effective Term of the license granted to
you hereunder. Accordingly, your use of any of Music Tribe’s Intellectual Property Rights independently of the
Software or outside the scope of this Agreement shall be considered an infringement of Music Tribe’s
Intellectual Property Rights. This shall not limit; however, any claim Music Tribe may have of a breach of
contract in the event you breach a term or condition of this Agreement. You shall use the highest standard of
care to safeguard all Software (including all copies thereof) form infringement, misappropriation, theft, misuse,
or unauthorized access. Except as expressly granted in this Agreement, Music Tribe reserves and shall retain all
rights, title, and interest in the Software, including all copyrights and copyrightable subject matter, trademarks
and trademark able subject matter, patents and patentable subject matter, trade secrets, and other intellectual
property rights, registered, unregistered, granted, applied-for, or both now in existence and that may be
created, relating thereto.
You (or the Organization, if and as applicable) shall retain ownership of all Intellectual Property Rights in and to
the work products that you create through or with the assistance of the Software.
Your Suggestions
Any feedback, comments, ideas, improvements, or suggestions (collectively, «Suggestions») provided by you to
Music Tribe with respect to the Software shall remain the sole and exclusive property of Music Tribe.
Music Tribe shall be free to use, copy, modify, publish, or redistribute the Suggestions for any purpose and in
any way without any credit or any compensation to you.
Modifications to Software
Music Tribe reserves the right to modify, suspend or discontinue, temporarily or permanently, the Software or
any service to which it connects, with or without notice and without liability to you.
Updates to Software
Music Tribe may from time to time provide enhancements or improvements to the features/functionality of
the Software, which may include patches, bug fixes, updates, upgrades, and other modifications («Updates»).
Updates may modify or delete certain features and/or functionalities of the Software. You agree that Music
Tribe has no obligation to (i) provide any Updates, or (ii) continue to provide or enable any features and/or
functionalities of the Software to you.
Third-Party Software
Third party software and data («Third-Party Software») may be attached to the Software. You acknowledge and
agree that, if you wish to obtain Third-Party Software on other terms, you should acquire this Third-Party
Software directly from its suppliers.
In no event shall such separate license agreements or additional terms and conditions between You and the
supplier be binding on Company or impose any additional obligations, or obligations inconsistent with the
terms of this Agreement, upon Company whatsoever.
The party providing the Third-Party Software is responsible for any warranty or liability related arising from the
Third-Party Software. MG-IP is not responsible in any way for the Third-Party Software or your use thereof.
Term and Termination
This Agreement shall remain in effect until terminated by you or Music Tribe.
Music Tribe may, in its sole discretion, at any time and for any or no reason, suspend or terminate this
Agreement with or without prior notice.
This Agreement will terminate immediately, without prior notice from Music Tribe, if you fail to comply with
any provision of this Agreement. You may also terminate this Agreement by deleting the Software and all
copies thereof from your computer.
Upon termination of this Agreement, you shall cease all use of the Software and delete all copies of the
Software from your computer.
Termination of this Agreement will not limit any of Music Tribe’s rights or remedies at law or in equity in case
of breach by you (during the term of this Agreement) of any of your obligations under the present Agreement.
Indemnification
You agree to indemnify, defend and hold harmless, Music Tribe and its officers, directors, employees, agents,
affiliates, successors, and assigns from and against any and all losses, damages, liabilities, deficiencies, claims,
actions, judgments, settlements, interest, awards, penalties, fines, costs or expenses of whatever kind,
including reasonable attorney’s fees, arising from or relating to : (i) your use or misuse of the Software; (ii) your
failure to comply with any applicable law, regulation or government directive; (iii) your breach of this
Agreement; or (iv) your Agreement or relationship with an Organization (if applicable) or any third party.
Furthermore, you agree that Music Tribe assumes no responsibility for the information or content you submit
or make available through this Software or the content that is made available to you by third parties.
No Warranties
The Software is provided to you «As is» and «As available» and with all faults and defects without warranty of
any kind. To the maximum extent permitted under applicable law, Music Tribe, on its own behalf and on behalf
of its affiliates and its and their respective licensors and service providers, expressly disclaims all warranties,
whether express, implied, statutory or otherwise, with respect to the Software, including all implied warranties
of merchantability, fitness for a particular purpose, title and non-infringement, and warranties that may arise
out of course of dealing, course of performance, usage or trade practice. Without limitation to the foregoing,
Music Tribe provides no warranty or undertaking, and makes no representation of any kind that the Software
will meet your requirements, achieve any intended results, be compatible or work with any other software,
systems, or services, operate without interruption, meet any performance or reliability standards or be error
free or that any errors or defects can or will be corrected.
Without limiting the foregoing, neither Music Tribe nor any of Music Tribe’s provider makes any representation
or warranty of any kind, express or implied: (i) as to the operation or availability of the Software, or the
information, content, and materials or products included thereon; (ii) that the Software will be uninterrupted
or error-free; (iii) as to the accuracy ,reliability, or currency of any information or content provided through the
Software; or (iv) that the Software, its servers, the content, or emails sent from or on behalf of Music Tribe are
free of viruses, scripts, trojan horses, worms, malware, time bombs or other harmful components.
Some jurisdictions do not allow the exclusion of or limitations on implied warranties or the limitations on the
applicable statutory rights of a consumer, so some or all of the above exclusions and limitations may not apply
to you.
Limitation of Liability
Notwithstanding any damages that you might incur, the entire liability of Music Tribe and any of its suppliers
under any provision of this Agreement and your exclusive remedy for all the foregoing shall be limited to the
amount actually paid by you for the Software.
To the maximum extent permitted by applicable law, in no event shall Music Tribe or its suppliers be liable for
any special, incidental, indirect, or consequential damages whatsoever (including, but not limited to, damages
for loss of profits, for loss of data or other information, for business interruption, for personal injury, for loss of
privacy arising out of or in any way related to the use of or inability to use the Software, third-party software
and/or third-party hardware used with the Software, or otherwise in connection with any provision of this
Agreement), even if Music Tribe or any supplier has been advised of the possibility of such damages and even if
the remedy fails of its essential purpose.
Some states/jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
Severability
If any provision of this Agreement is held to be unenforceable or invalid, such provision will be changed and
interpreted to accomplish the objectives of such provision to the greatest extent possible under the applicable
law and the remaining provisions will continue in full force and effect.
No failure to exercise, and no delay in exercising, on the part of either party, any right or any power under this
Agreement shall operate as a waiver of that right or power. Nor shall any single or partial exercise of any right
or power under this Agreement preclude further exercise of that or any other right granted herein. In the event
of a conflict between this Agreement and any applicable purchase or other terms, the terms of this Agreement
shall govern.
Amendments to this Agreement
Music Tribe reserves the right, at its sole discretion, to modify or replace this Agreement at any time. If a
revision is material, we will provide at least 30 days’ notice prior to any new terms taking effect. What
constitutes material change will be determined at our sole discretion.
By continuing to access or use our Software after any revisions become effective, you agree to be bound by the
revised terms. If you do not agree to the new terms, you are no longer authorized to use the Software.
Governing Law
The Laws of the jurisdiction where you are a resident, excluding its conflicts of law rules shall govern any
dispute arising out of or in connection with this Eula. The Applicability of the Uniform Commercial Code (UCC)
and any other laws that direct the application of the laws of any other jurisdictions are expressly excluded.
Changes to this Agreement
We reserve the exclusive right to make changes to this Agreement from time to time. Your continued access to
and use of the software constitutes your Agreement to be bound by, and your acceptance of, the terms and
conditions posted at such time. You acknowledge and agree that you accept this Agreement (and any
amendments thereto) each time you load, access, or use the software.
Therefore, we encourage you to review this Agreement regularly.
If, within thirty (30) days of posting changes or amendments to this Agreement, you decide that you do not
agree to the updated terms, you may withdraw your acceptance to the amended terms by providing us with a
written notice of your withdrawal.
No Employment or Agency Relationship
No provision of this Agreement, or any part of relationship between you and Music Tribe is intended to create,
nor shall they be deemed or construed, to create any relationship between you and Music Tribe other than
that of an end user of the software and services provided.
Equitable Relief
You acknowledge and agree that your breach of this Agreement would cause Music Tribe irreparable harm for
which money damages alone would be inadequate. In addition to damages, and any other remedies to which
Music Tribe may be entitled, you acknowledge and agree that we may seek injunctive relief to prevent the
actual, threatened, or continued breach of this Agreement.
Limitation of Time to File Claims
Any cause of action or claim you may have arising out of or relating to this Agreement must be
commenced within one (1) year after the cause of action accrues, otherwise, such cause of action or claim
is permanently barred.
Entire Agreement
The Agreement constitutes the entire Agreement between you and Music Tribe regarding your use of the
Software and supersedes all prior and contemporaneous written or oral arguments between you and
Music Tribe.
You may be subject to additional terms and conditions that apply when you use or purchase other Music
Tribe’s services, which Music Tribe will provide to you at the time of such use or purchase.
Contact Us
Do not hesitate to contact us at [email protected] if you have any questions about this Agreement.