Tascam dr 60mk2 инструкция на русском

• Описание
• Характеристики
• О бренде TASCAM

Другие товары бренда TASCAM

Tascam DR-60D MKII – Профессиональный, портативный рекордер, специально разработанный для работы на съемочных площадках и работы в паре с видеокамерой.

Позволяет легко сделать запись звука концерта, свадьбы, лекции с высоким битрейтом, для дальнейшей редакции на студии. Вы можете подключить внешние микрофоны, микшеры, сигнал с вашей камеры. В DR-60DMK2 много технологичных функций необходимых современному звукооператору:

• TRIM MAX – цифровое усиление линейного сигнала до +64 Дб;
• автоматическая и ручная (микшер) настройка записи;
• контрольная запись – функция делает дублирующий трек (-12 Дб), даже если ваша запись испорчена слишком мощным сигналом, у вас есть дубль тише на 12 Дб;
• автоматическое подавление пиков – каждый пик, который присутствует в вашем треке будет автоматически откорректирован.
• крепление для штатива и специальный винт для закрепления фотоаппарата;
• Проводной пульт управления — поддерживает как footswitcRC-3F, так и расширенный пульт RC-10.

Также есть и стандартные функции, характерные для аналогичных устройств – воспроизведение записанных треков, блокировка кнопок;

Основные особенности:

• AD/DA 24 бит, 96 кГц;
• форматы записи аудио WAV/BWF;
• интуитивно понятное управление;
• высокое качество записи;
• автоматизированные пресеты для настройки качества записи;
• аудио вход — 2 — XLR/TRS ¼ и 2-TRS ¼;
• аудио выход 2-TRS ¼;
• вход для наушников TRS 1/8 стерео;
• поддержка SD/SDHC до 32 Гб;
• передача данных USB 2,0:
• фантомное питание;
• дисплей;
• крепление к штативу резьба 1/4 дюйма;
• крепление для фотоаппарата;
• питание от 4-х батареек АА или по USB.

Технические характеристики DR-60DMK2

Характеристики

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Tascam DR-100MKII.

Какой вес Tascam DR-100MKII?

Какие сертификаты Tascam DR-100MKII имеет?

Какая высота Tascam DR-100MKII?

Какая ширина Tascam DR-100MKII?

Какая толщина Tascam DR-100MKII?

Какой тип USB-подключения Tascam DR-100MKII имеет?

Инструкция Tascam DR-100MKII доступно в русский?

Не нашли свой вопрос? Задайте свой вопрос здесь

Задать вопрос о Tascam DR-100 Mk II

Картинка с сайта: okno-audio.ru

• Описание

Tascam

Картинка с сайта: manualmachine.com

D01231320A

DR-60D

Linear PCM Recorder

REFERENCE MANUAL

)

«

Картинка с сайта: manualmachine.com

Contents

1 – Introduction ……………………………………………………….. 5

Features……………………………………………………………………………………………. 5

Conventions used in this manual ………………………………………………… 6

2 – Names and functions of parts ……………………………… 7

Front panel ……………………………………………………………………………………….7

Left side panel ………………………………………………………………………………. 10

Right side panel ……………………………………………………………………………. 11

Rear panel ………………………………………………………………………………………12

Top panel ……………………………………………………………………………………….. 13

Bottom Panel ………………………………………………………………………………… 13

Home Screen …………………………………………………………………………………. 14

Recording Screen …………………………………………………………………………. 16

Menu item list ……………………………………………………………………………….. 18

Using menus …………………………………………………………………………………. 19

Basic operation………………………………………………………………………………20

3 – Preparation ……………………………………………………….22

Powering the unit………………………………………………………………………….22

Power sources ………………………………………………………………………..22

Using AA batteries …………………………………………………………………22

Using an AC adaptor (sold separately) ……………………………… 23

Using an external battery pack (sold separately) …………….23

Using USB bus power …………………………………………………………… 24

Turning the power on and off (putting it in standby) …………….25

Starting up the unit ……………………………………………………………….25

Shutting down (putting the unit in standby) …………………..25

Resume function …………………………………………………………………… 26

Setting the date and time …………………………………………………………… 26

Inserting and removing SD cards……………………………………………….27

Inserting the SD card ……………………………………………………………. 27

TASCAM DR-60DMKII

2

Removing the card ……………………………………………………………….. 27

SD card write protection switches …………………………………….. 28

Preparing an SD card for use ……………………………………………………… 29

Camera connection and attachment ………………………………………..29

Connecting monitors and headphones ……………………………………30

Monitoring ……………………………………………………………………………………..30

Enabling monitoring …………………………………………………………….30

Selecting the monitored signal ………………………………………….. 31

4 – Recording …………………………………………………………. 32

Selecting file format, sampling frequency,

and maximum file size …….. 32

Preparing the recording inputs …………………………………………………. 33

Connecting microphones …………………………………………………… 33

Recording an external device (LINE IN) ……………………………. 34

Setting the input types ………………………………………………………..34

Using phantom power ………………………………………………………….35

Using plug-in power …………………………………………………………….. 36

Adjusting the input level/Muting ……………………………………………… 36

Using the limiter ……………………………………………………………………………38

Using the low-cut filter ……………………………………………………………….. 39

Set where to save the file ……………………………………………………………. 39

Overview of recording modes …………………………………………………… 39

Recording (MONO/STEREO recording) ……………………………………..40

Make recording settings ……………………………………………………… 40

Starting the recording …………………………………………………………. 41

File names when recording in MONO/STEREO ……………….. 41

Simultaneously recording two files at different input levels

(DUAL REC) …………………………………………………………………………………….. 42

Enabling dual recording……………………………………………………….42

Картинка с сайта: manualmachine.com

Contents

Starting dual recording ……………………………………………………….. 43

Dual recording file names ……………………………………………………44

Recording 4 channels …………………………………………………………………..44

Making 4-channel recording settings ……………………………….44

Starting 4-channel recording………………………………………………45

File names when recording in 4-channel …………………………. 46

Recording automatically (AUTO REC) ………………………………………..46

Creating and changeover to a new file during continued

recording (Track increment)………………………………………………………..48

Manual track increment during recording ……………………….48

Automatic track increment by file size ………………………………48

Mark function ………………………………………………………………………………..49

Adding marks manually to a recording……………………………..49

Adding marks automatically to a recording…………………….. 49

Moving to a mark position ………………………………………………….. 49

Recording the moment before pushing RECORD (PRE REC) … 50

Delaying the start of recording (REC DELAY) ………………………….50

Self-timer function ………………………………………………………………………..51

Using the auto tone function …………………………………………………….. 51

Setting the auto tone function…………………………………………… 51

Setting auto tone length …………………………………………………….. 52

Adjusting the volume of the auto tone and the slate tone …… 52

Adding slate tones ……………………………………………………………………….. 52

Recording duration ……………………………………………………………………… 53

5 – Working with Files and Folders (BROWSE screen) …54

Screen navigation …………………………………………………………………………54

Icons on the BROWSE screen ……………………………………………………… 55

File operations ……………………………………………………………………………….55

Folder operations ………………………………………………………………………….56

Creating a new folder …………………………………………………………………..57

6 – Playback …………………………………………………………… 58

Adjusting playback volume ………………………………………………………..58

Setting the playback area (AREA) ………………………………………………58

Selecting a folder for the playback area (1) ……………………………… 59

Selecting a folder for the playback area (2)………………………………60

Selecting files for playback (skip) ……………………………………………….60

Playback ………………………………………………………………………………………….61

Pausing …………………………………………………………………………………… 61

Stopping ………………………………………………………………………………….61

Rewinding and fast-forwarding (search) …………………………. 61

Changing the playback position ………………………………………… 61

Repeat playback (REPEAT) ………………………………………………………….. 61

Moving back a few seconds for replay (jump-back playback) …62

Playback of files recorded using dual recording …………………….. 62

7 – QUICK button operations ………………………………….. 63

Features of the QUICK button ……………………………………………………. 63

Opening the quick menu …………………………………………………………….64

Closing the quick menu ……………………………………………………….65

Deleting the selected file (Quick Delete) ………………………………….65

Dividing the selected file (DIVIDE) ……………………………………………. 65

Increasing the perceived overall sound pressure to enhance

listenability (Level Alignment) …………………………………………………… 67

Using the playback equalizer …………………………………………………….. 68

Setting mic input gain with the quick menu …………………………… 68

8 – Mixer ………………………………………………………………… 69

Making mixer settings …………………………………………………………………. 69

Using the MS decoder …………………………………………………………………. 70

Decoding the input sound as you record ………………………… 70

TASCAM DR-60DMKII

3

Картинка с сайта: manualmachine.com

Contents

Decoding the playback sound ……………………………………………71

MS decoder settings …………………………………………………………….. 71

9 – Connecting with a computer ………………………………72

Transferring files to a computer ………………………………………………… 73

Transferring files from a computer …………………………………………….73

Disconnecting from a computer ………………………………………………..73

10 – Settings and Information ………………………………… 74

Viewing Information (INFORMATION) ……………………………………….74

File information page ……………………………………………………………74

Card information page …………………………………………………………75

System information page …………………………………………………….75

System Settings and Formatting (SYSTEM) …………………………….. 76

Setting the automatic power saving function ………………… 76

Setting the backlight ……………………………………………………………. 76

Adjusting the display contrast ……………………………………………. 76

Setting the type of AA batteries ………………………………………… 76

Setting the phantom power voltage ………………………………… 76

Restoring the factory settings …………………………………………….77

Using QUICK FORMAT …………………………………………………………..77

Using FULL FORMAT ……………………………………………………………..77

Setting the format of file names ……………………………………………….. 78

File name format ………………………………………………………………….. 78

Setting the WORD item ……………………………………………………….. 78

Resetting the number (COUNT) ………………………………………….78

11 – Using the REMOTE jack ……………………………………. 79

Footswitch (TASCAM RC-3F) ……………………………………………………….79

Setting footswitch operation ………………………………………………79

Using the footswitch …………………………………………………………….80

Remote control (TASCAM RC-10) ………………………………………………..80

TASCAM DR-60DMKII

4

Setting the wired remote control ………………………………………80

Using the wired remote control ………………………………………… 80

Overview of mode functions ………………………………………………80

12 – Messages ………………………………………………………… 81

13 – Troubleshooting ………………………………………………84

14 – Specifications …………………………………………………. 86

Ratings …………………………………………………………………………………………….86

Inputs and outputs ……………………………………………………………………….86

Analog audio input and output ………………………………………….86

Control input and output ……………………………………………………. 87

Audio performance ………………………………………………………………………87

Computer compatibility ……………………………………………………………… 87

Other specifications ……………………………………………………………………..88

Dimensional drawings …………………………………………………………………89

Картинка с сайта: manualmachine.com

1 – Introduction

Thank you very much for purchasing the TASCAM DR-60DMKII
Linear PCM Recoder. Please read this Owner’s Manual carefully in
order to maximize your use of all the unit’s features. We hope that
you will enjoy using this recorder for many years to come.

After you have finished reading this manual, please keep it in a safe
place for future reference.

You can also download the Owner’s Manual from the TEAC Global
Site (http://teac-global.com/).

Features

This recorder includes audio inputs and outputs that are suitable
for use with digital single-lens reflex (DSLR) cameras, enabling the
recording of high-quality audio with DSLR video.

•

Compact audio recorder that uses SD/SDHC cards as recording
media

•

TASCAM original High Definition Discrete Architecture (HDDA)
microphone preamps provide high-quality recording inputs

•

In addition to ordinary stereo recording, simultaneous recording
of up to four channels is possible

•

Four channels can be mixed down to two for stereo output

•

Recording levels can be adjusted independently for the 1/L, 2/R
and 3-4 inputs

•

Dual recording function allows two files to be recorded
simultaneously at different levels

•

44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format) recording
possible

•

Broadcast Wave Format (BWF) supported as WAV recording
format

•

XLR mic/line inputs can provide phantom power (+24V/+48V)

TRS mic/line inputs (1/L and 2/R) support +24dBU input when
set to LINE

•

Stereo mini jack input supports mics that require plug-in power,
allowing the input of video mics and other high-output mics
(+10dBV maximum input level)

•

Slate tone functions (automatic/manual) simplify synchronization
of video files when editing

•

CAMERA OUT connector allows the high-quality audio from this
unit to be output to a DSLR camera for recording

•

CAMERA IN connector enables convenient monitoring of audio
from a DSLR camera

•

Auto-record function starts recording automatically when a set
sound input level is detected

•

Mid-side decoding function can be used with MS mics

•

Auto-record function can automatically start and stop recording
at set levels

•

Can start recording a new file automatically when a maximum
file size set in advance is reached without interrupting recording

•

A QUICK button is available for easy access to various functions

•

Track incrementing function allows a recording to be split by
creating a new file when desired

•

Pre-recording (PRE REC) function allows the unit to record the 2
seconds of sound before recording is activated

•

Limitter function is available to reduce the level automatically in
case of excessively large input.

•

Low cut filter conveniently reduces low-frequency noise

•

Self-timer function to start recording after a set period of time.

•

Jump back and play function allows the last several seconds of
the currently played file to be replayed again by simply pressing
a button

TASCAM DR-60DMKII

5

Картинка с сайта: manualmachine.com

1 – Introduction

•

Delay function that eliminates time lags caused by differences in
the distances of two sets of inputs from the sound source

•

DIVIDE function allows files to be split where desired

•

MARK function convenient for moving to specific locations

•

Equalizers function for playback, and level alignment function to
enhance the perceived overall sound pressure

•

File name format can be set to use a user-defined word or the
date

•

Resume function to memorize the playback position before the
unit is turned off (enter standby).

•

3.5 mm (1/8”) line/headphones output jack

•

128 x 64 pixel LCD with backlight

•

Mini-B type USB 2.0 port

•

Operates on 4 AA batteries, an AC adaptor (sold separately:
TASCAM PS-P515U), external battery pack (sold separately:
TASCAM BP-6AA)or USB bus power

•

Tripod mounting threads (bottom) and DSLR screw attachment
that allows attachment and removal with a coin (top)

•

Dedicated remote control jack (for use with RC-10 and RC-3F (sold
separately) )

•

HOLD switch to prevent accidental operation

•

Handles on the front left and right sides protect the screen and
can be used to attach a shoulder belt

Conventions used in this manual

In this manual, we use the following conventions:

•

When we refer to buttons, connectors and other parts of this unit
and other equipment, we use a bold font like this: MENU button.

•

When we show messages, for example, that appears on the unit’s
display, the typeface looks like this:

•

SD memory cards are called “SD cards”.

•

We refer to digital single-lens reflex cameras as “DSLR cameras”
or “DSLRs”.

•

Words that appear on the computer display are shown in
quotation marks like this: “DR-60DMKII”

•

Additional information is provided as necessary as tips, notes
and cautions.

TIP

These are tips about how to use the unit.

NOTE

These provide additional explanations and describe special
cases.

CAUTION

Failure to follow these instructions could result in injury, damage
to equipment or lost recording data, for example.

REPEAT

.

TASCAM DR-60DMKII

6

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

Front panel

1 Handles

Attach a strap, for example, here.

2 Display

Shows a variety of information.

3 DATA dial (ENTER/MARK)

Turn to select items and change values on setting screens.
Use also to change the playback position in a file.
Push to confirm selections on setting screens and to answer “YES”

to confirmation pop-up messages.

Press during recording to add a mark manually. (See “Adding
marks manually to a recording” on page 49.)

Press the . or / button while pressing and holding this
dial to move to the previous or next mark, respectively. (See
“Moving to a mark position” on page 49.)

4 MONITOR SELECT button

When not playing back, press to open the monitoring source
selection pop-up menu.

When playing back dual-recorded files, press to switch between
files.

5 MENU button

When the Home Screen or
the

MENU

Screen.

When a setting screen is open, press to move up one level in
the menu. When the
Home Screen.

6 MIXER button

Press this button to open the
When the

the Home Screen.

MIXE R

screen is open, press this button to return to

MIXE R

screen is open, press to open

MENU

Screen is open, press to return to the

MIXE R

screen.

TASCAM DR-60DMKII

7

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

7 QUICK button

Press when the Home Screen,
open to show the quick menu pop-up.

The function to be shown depends on the state of the unit when
the button is pressed.

Recorder status Functions shown

Stopped

Playing back Level align and playback EQ functions
Recording

standby
Recording

MIXE R

screen

open

BROWSE

screen

open

8 DUAL indicator

This lights orange when recording in dual recording mode.

9 4CH indicator

This lights orange when recording in 4-channel recording mode.

0 REC indicator

This blinks when in recording standby and lights red when
recording.

BROWSE

screen or

Delete/divide current playback file, level
align, playback EQ and mic input gain
setting functions

Mic input gain setting function

Mic input gain setting function

File/folder operations

MIXE R

screen is

q 1/L knob and PEAK indicator

Use this knob to adjust the input level from the 1/L connector on
the left side of the unit.

The 1/L PEAK indicator lights when the 1/L input level is about
to cause distortion. This also lights if distortion occurs in the
analog circuitry during mic input, but this does not light if
distortion occurs in the analog circuitry during line level input.
(See “Adjusting the input level/Muting” on page 36.)

w Input switch (1/L)

Set the input type for the 1/L connector and whether phantom
power is on or off.

e 2/R knob and PEAK indicator

Use this knob to adjust the input level from the 2/R connector
on the left side of the unit.

The 2/R PEAK indicator lights when the 2/R input level is about
to cause distortion. This also lights if distortion occurs in the
analog circuitry during mic input, but this does not light if
distortion occurs in the analog circuitry during line level input.
(See “Adjusting the input level/Muting” on page 36.)

r Input switch (2/R)

Set the input type for the 2/R connector and whether phantom
power is on or off.

t 3-4 knob and PEAK indicator

Use to adjust the input level from the 3/4 connector on the left
side of the unit.

The 3-4 PEAK indicator lights when the 3-4 input level is about
to cause distortion.

TASCAM DR-60DMKII

8

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

y . button

During playback or when stopped in the middle of a file, press to
return to the beginning of the file.

When stopped at the beginning of a file, press to skip to the
beginning of the previous file.

Press and hold to search backward.
Press this button while pressing and holding the DATA dial to

return to the previous mark.
On the setting screens, use this button to move the cursor left.

On the

BROWSE

Screen, press this button to move up a level.

u Stop(8) [HOME] button

Press this button during playback to cause the playback to pause
at the current position. Press this button during pause time to
return to the beginning of the playback file.

Press this button during recording or recording standby to cause
the recording to stop.

When any other screen is open, press this button to return to the
Home Screen. Use this button to answer “NO” to a confirmation
message.

i / button

When stopped or playing back, press to skip to the next file.
Press and hold to search forward.
On the setting screens, use this button to move the cursor right.
Press this button while pressing and holding the DATA dial to

move to the next mark.
On the

BROWSE

If a file is selected, the file is loaded and the unit returns to the
Home Screen and stops.

Screen, press this button to move down a level.

o 7 (playback) button

When the Home Screen is displayed and playback is stopped,
press this button to start playback.

During playback, press this button to start jump-back playback.
(See “Moving back a few seconds for replay (jump-back

playback)” on page 62.)
When a file or folder is selected in the

button to return to the Home Screen and play the file or the first
file in the folder from the beginning.

p SLATE button

Press and hold during playback to record a slate stone. (See
“Adding slate tones” on page 52.)

a 0 (record) button

Press when stopped to start recording standby
Press when recording to pause recording (resume recording

standby).

BROWSE

screen, press this

TASCAM DR-60DMKII

9

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

Left side panel

NOTE

Do not apply excessive force when plugging in external devices to
connect them to this unit or during use. In particular, be careful
when using a standard-to-mini plug adapter, because the appli­cation of unintended force could result in damage to the device.

s 1/L connector (XLR/TRS)

These are balanced analog XLR/TRS combo jacks for microphone
and line level inputs.

XLR (1: GND, 2: HOT, 3: COLD)
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)

d 3-4 connector (3.5mm stereo mini jack)

This TRS analog input jack can provide plug-in power.
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)

TASCAM DR-60DMKII

10

f 2/R connector (XLR/TRS)

These are balanced analog XLR/TRS combo jacks for microphone
and line level inputs.

XLR (1: GND, 2: HOT, 3: COLD)
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)

CAUTION

•

Confirm that phantom power is OFF before connecting a line
level device to a 1/L connector or 2/R connector. If you connect
a line level device while phantom power is being supplied, that
device and this unit could be damaged.

•

When using a condenser microphone, before connecting to and
disconnecting from a 1/L connector or 2/R connector, confirm
that the phantom power for that jack is OFF. If you connect or
disconnect a mic while phantom power is being supplied, that
mic and this unit could be damaged.

•

Do not connect an unbalanced dynamic mic to an XLR connector
when phantom power is being supplied. Doing so could damage
that mic and this unit.

g CAMERA IN connector (3.5mm stereo mini jack)

Connect to the audio output of a camera.
Refer to the camera’s operation manual to identify this connector

on the camera. (See “Camera connection and attachment” on
page 29.)

h REMOTE connector (2.5mm TRS jack)

Connect a TASCAM RC-3F footswitch or TASCAM RC-10 wired
remote control (both sold separately) here to enable remote
starting and stopping of playback and other functions. (See “11 –
Using the REMOTE jack” on page 79.)

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

j CAMERA OUT (LOW) volume control

Use to adjust the volume output from the CAMERA OUT (LOW)
connector.

k CAMERA OUT (LOW) connector (3.5mm stereo mini jack)

Connect a camera external mic connector.
Refer to the camera’s operation manual to identify this connector

on the camera. (See “Camera connection and attachment” on
page 29.)

Right side panel

NOTE

Do not apply excessive force when plugging in headphones
and external devices to connect them to this unit or during use.
In particular, be careful when using a standard-to-mini plug
adapter, because the application of unintended force could result
in damage to the device.

l SD card slot

Insert an SD card here.

; button

Press and hold this button to turn the unit’s power ON or
OFF(Standby). (See “Turning the power on and off (putting it in
standby)” on page 25)

TASCAM DR-60DMKII

11

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

z HOLD switch

Shift to the top end (in the direction of the arrow) to engage the
hold function.

All buttons are inoperative when hold is ON.

x USB port

Use the included USB cable to connect with a computer USB
port. (See “9 – Connecting with a computer” on page 72.)

Power can be supplied through the USB cable provided with the
unit or an AC adaptor (sold separately: TASCAM PS-P515U).

CAUTION

Always connect the recorder directly to a computer. Do not use a
USB hub.

c PHONES volume control

Use to adjust the volume output from the PHONES jack.

v PHONES jack (3.5mm stereo mini jack)

Connect stereo headphones to this stereo mini jack.
Use the PHONES control to adjust the volume.

CAUTION

Before connecting headphones, lower the PHONES volume to
the minimum level. Failure to do so could result in a sudden loud
noise that could harm hearing, for example.

b CAMERA OUT (HIGH)/LINE OUT volume control

Use to adjust the volume output from the CAMERA OUT (HIGH)/
LINE OUT jack.

n CAMERA OUT (HIGH)/LINE OUT jack (3.5mm stereo mini jack)

Use this to connect with the line input jack of an amp or other
equipment.

Use the CAMERA OUT (HIGH)/LINE OUT control to adjust the
volume.

Rear panel

m Battery compartment cover

TASCAM DR-60DMKII

12

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

, Battery compartment

Install batteries (4 AA batteries) in this compartment to power
the unit. (See “Using AA batteries” on page 22.)

Top panel

. DSLR attachment bracket

Use this bracket, which is preinstalled on the unit, with the DSLR
mounting screw.

If you do not want to use this bracket, use a coin or other tool to
remove the four attachment screws.

/ DSLR mounting screw (1/4-inch)

Use to attach this unit to the bottom of a camera or a rack that
supports camera mounting screws, for example.

Bottom Panel

! Tripod mounting threads (1/4-inch)

Use to attach this unit to a tripod.

CAUTION

•

Tighten the unit securely to the tripod or microphone stand to
prevent it from falling off.

•

Place the tripod or microphone stand on a level surface when
using it with this unit.

•

Some tripods have different screw specifications that make direct
connection impossible. Use a commercially-available adapter
with such tripods.

@ Video camera pin hole

When using a tripod with a pin for video cameras, align this hole
with the pin when attaching the unit to the tripod.

TASCAM DR-60DMKII

13

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

Home Screen

NOTE

When monitoring, some meters, icons and other items will
change to recording screen appearance.

1 Monitoring mode

This shows what audio is now being monitored.

Indicator Meaning

MIX

SUB Dual recording mode sub file
1+2 Mix of channels 1-2
3+4 Mix of channels 3-4
CAM CAMERA IN jack sound input
CH1 Channel 1 sound input
1-M Left channel of dual recording mode main file
1-S Left channel of dual recording mode sub file
CH2 Channel 2 sound input

Mix of channels 1-4,
or dual recording mode main file

Indicator Meaning

2-M Right channel of dual recording mode main file
2-S Right channel of dual recording mode sub file
CH3 Channel 3 sound input
3-M Left channel of dual recording mode main file
3-S Left channel of dual recording mode sub file
CH4 Channel 4 sound input
4-M Right channel of dual recording mode main file
4-S Right channel of dual recording mode sub file

2 Repeat playback setting

One of the following icons appears according to the current
setting.

Single file playback
Single file repeat playback
All file repeat playback

3 Playback area

This shows the current playback file area.

ALL

All files in the MUSIC folder

FOLDER

All files in the selected folder

4 Current playback file number/total number of files

This shows the current file number and total number of files in
the current playback area.

5 Elapsed time

This shows the elapsed time (hours: minutes: seconds) of the
current file.

TASCAM DR-60DMKII

14

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

6 Power supply status

When a battery is being used, a battery icon shows the amount
of power remaining in bars (“ ”, “ ”, “ ”).

The battery is almost dead and the power will soon turn off
(standby) if the icon has no bars “ ”.

When using the PS-P515U AC adaptor (sold separately) or USB
bus power, “ ” appears.

NOTE

Sometimes a
or conducting other demanding operations even when battery
power remains.

7 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

8
9
7
,
m
/
.

8 Level meter

These show the levels of the input playback signals.

Battery Low

Stopped
Paused
Playing back
Fast-forwarding
Fast-rewinding
Skipping forward
Skipping backward

warning appears when recording

9 Track status display

This icon changes according to the recording mode.

Indicators
(examples)

/ / / Monitoring in MONO mode
/ Monitoring in STEREO mode

/

0 Playback position display

The current playback position is shown by a bar. As playback
progresses, the bar extends to the right.

q File name

This shows the name of the file playing back unless there are
multiple files recorded in 4-channel recording mode or dual
recording mode. In these cases, it shows the project name.

w Remaining time

This shows the remaining time (hours: minutes: seconds) of the
current file.

Meaning

Playing a file recorded in MONO or
STEREO mode

Playing a file recorded in DUAL MONO
or DUAL ST mode or monitoring in these
modes

Playing a file recorded in 4CH mode or
monitoring in this mode

TASCAM DR-60DMKII

15

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

e Level align status

This icon shows whether the level align function is on or off. (See
“Increasing the perceived overall sound pressure to enhance
listenability (Level Alignment)” on page 67.)

Level align function off
Level align function on

r Playback equalizer status

This icon shows whether the playback equalizer is on or off. (See
“Using the playback equalizer” on page 68.)

Playback equalizer off
Playback equalizer on

t Peak value in decibels (dB)

The maximum level that occurs in a fixed period of time is
displayed digitally.

Recording Screen

1 Monitoring mode

This shows what audio is being monitored now.

Indicator Meaning

MIX

SUB Dual recording mode sub file
1+2 Mix of channels 1-2
3+4 Mix of channels 3-4
CAM CAMERA IN jack sound input
CH1 Channel 1 sound input
1-M Left channel of dual recording mode main file
1-S Left channel of dual recording mode sub file
CH2 Channel 2 sound input
2-M Right channel of dual recording mode main file
2-S Right channel of dual recording mode sub file
CH3 Channel 3 sound input

Mix of channels 1-4,
or dual recording mode main file

TASCAM DR-60DMKII

16

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

Indicator Meaning

3-M Left channel of dual recording mode main file
3-S Left channel of dual recording mode sub file
CH4 Channel 4 sound input
4-M Right channel of dual recording mode main file
4-S Right channel of dual recording mode sub file

2 Prerecording or Auto recording function status

“ ” appears when the prerecording function is ON, and in
recording standby.

“ ” appears when the auto recording function is ON, and
recording.

3 Recording format

This shows the file recording format.
WAV16, WAV24, BWF16 or BWF24

4 Recording sampling frequency

This shows the file recording sampling frequency.

44.1kHz, 48kHz or 96kHz

5 Elapsed recording time

The elapsed recording time of the file appears as hours: minutes:
seconds.

6 Number of recording channels

This shows the number of recording channels in the file.
ST or MONO

7 Auto tone function status

This icon shows whether the auto tone function is on or off. (See
“Using the auto tone function” on page 51.)

No icon Auto tone off
Auto tone on

8 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

09
0

9 Input source

This icon shows the input source.

Indicators
(examples)

0 Recording level meters

These show the levels of the input audio.
The b mark at the –12dB position provides a guide when

adjusting the input levels.

Recording standby or Recording paused
Recording
Self-timer recording activated

Meaning

/ / / Mono recording mode input source
/ Stereo recording mode input source

Dual recording mode input source and

/

gain setting for the second recording (0
to –12)

4-channel recording mode input source

TASCAM DR-60DMKII

17

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

q File name

This shows the file name that is automatically assigned to a
recording file.

This shows the project name when there are multiple files
recorded in 4-channel recording mode or dual recording mode.

w Remaining recording time

The remaining recording time on the SD card is shown in hours:
minutes: seconds according to the recording mode, sampling
frequency and recording format settings.

e Low cut filter status

This shows whether the low cut filter is ON/OFF. (See “Using the
low-cut filter” on page 39.)

This icon is shown as light letters on a dark background if the
low-cut filter is set to 40Hz, 80Hz or
2 or channels 3/4.

: Low cut filter off
: Low cut filter on

r Limiter function status

An icon appears if the limiter function setting for channel 1, 2 or
3/4 is set to

: Limiter off
: Limiter on

t SLATE button setting

This shows the SLATE button setting (enable/disabled).
(See “Adding slate tones” on page 52.)
: SLATE button disabled
: SLATE button enabled

y Peak value in decibels (dB)

Peak input level values are shown digitally.

18

MONO

or

TASCAM DR-60DMKII

LINK

. (See “Using the limiter” on page 38.)

120

Hz for channel 1, channel

Menu item list

Press the MENU button to open the
menu are as follows.

Menu item Function Pages

REC MODE

INPUT SETTING Make input settings.

REC SETTING

AUTO REC

PLAY SETTING

BROWSE

OTHERS Show submenu items.

Set the recording
source.

Make recording
settings

Make auto recording
settings.

Make play area,
repeat playback and
jump-back settings.

SD card file and folder
operations

MENU

screen. The items in this

page 39, page 40,
page 42, page 44
page 36, page 38,
page 39
page 30, page 32,
page 48, page 50,
page 51, page 52

page 46, page 49

page 58, page 61

page 54, page 59
page 60
page 26, page 36,
page 74, page 78,
page 79

Картинка с сайта: manualmachine.com

The

OTHERS

MENU

Submenu item Function Pages

INFORMATION

FILE NAME File name settings page 78
DATE/TIME Date and time settings page 26

REMOTE

SYSTEM Various system settings page 76

CAUTION

•

When in recording standby or recording, only the

SETTING

•

When recording, the

submenu appears when

screen. The menu items contained are as follows.

Information about the file, SD card,
and system

Settings for the TASCAM RC-3F
footswitch and TASCAM RC-10
wired remote control (both sold
separately)

and

AUTO REC

screens are shown.

AUTO REC

OTHERS

is selected in the

setting cannot be changed.

page 74

page 79,
page 80

INPUT

2 – Names and functions of parts

Using menus

Use the

MENU

screen to make various settings.

1. Press the MENU button to open the

2. Turn the DATA dial to select a menu item (highlighted), and

press the DATA dial or / button to move to various settings
screens.

Example: PLAY SETTING screen

3. Turn the DATA dial to select a menu item (highlighted) to be
set.

Example: AREA is selected.

MENU

screen.

TASCAM DR-60DMKII

19

Картинка с сайта: manualmachine.com

2 – Names and functions of parts

4. Press the DATA dial or / button to move the cursor to

highlight the value of the setting.

5. Turn the DATA dial to change the setting.

6. Press the DATA dial or . button to set a different item in the

same menu.

This enables you to select a new item. Turn the D ATA dial again

to select an item to be set.

7. Repeat step 3 to 6 as necessary to set each item.

8. To open the
the MENU button.

To return to the Home Screen, press the Stop (8) [HOME]

button.

MENU

screen (or

OTHERS

submenu screen), press

Basic operation

Use the following buttons to operate the various screens.

MENU button:

Opens the

Stop ( [HOME] button:

When any other screen is open, press this to return to the Home
Screen. Use this to answer “NO” to a confirmation message.

DATA dial:

Turn the DATA dial to select items and change values on setting
screens. You can also turn the DATA dial to change the file
playback position.

Press the DATA dial to confirm items selected on setting screens
and to answer “Yes” to confirmation pop-up messages.

Press the DATA dial during recording to add a mark manually.
(See“Adding marks manually to a recording” on page 49.)

While pressing and holding the DATA dial, press the . button
to jump to the previous mark or press the / button to jump
to the next mark. (See “Moving to a mark position” on page 49.)

/ button:

Use this to move the cursor (the highlighted area) to the right on
the screen, and to open folders on the

. button:

Use this to move the cursor (the highlighted area) to the left on
the screen, and to close folders on the

MENU

screen.

BROWSE

BROWSE

screen.

screen.

TASCAM DR-60DMKII

20

Картинка с сайта: manualmachine.com

QUICK button:

This opens the quick menu pop-up.

• When stopped: Delete/divide current playback file, level align,

playback EQ and mic input gain setting functions

• During playback: Level align and playback EQ functions

• In recording standby: Mic input gain setting function

• When recording: Mic input gain setting function

• When the

• When the

function

BROWSE

screen is open: File/folder operations

MIXE R

screen is open: Mic input gain setting

Record (0) button

Opens the
When the

REC MODE

REC MODE

screen.

screen is open, returns to the Home Screen.

MIXER button

Opens the
When the

MIXE R

screen.

MIXE R

screen is open, returns to the Home Screen.

2 – Names and functions of parts

TASCAM DR-60DMKII

21

Картинка с сайта: manualmachine.com

3 – Preparation

Powering the unit

Power sources

DR-60DMKII can operate on four AA batteries, TASCAM PS-P515U AC
adaptor (sold separately) or USB cable provided with the unit (USB
bus power).

Alkaline or Ni-MH batteries can be used.

Using AA batteries

Remove the battery compartment cover on the back of the unit.
Install 4 AA batteries in the compartment with the ¥ and ^ marks
as shown. Then, close the battery compartment cover.

When using AA batteries, set the type of battery in order to
accurately show the amount of power remaining and allow the
unit to accurately determine whether power is available for proper
operation. (See “Setting the type of AA batteries” on page 76.)

CAUTION

•

Manganese dry cell batteries (R6) cannot be used with this unit.

•

This unit cannot recharge Ni-MH batteries. Use a commercially
available recharger.

NOTE

A great amount of power is required to provide phantom power
to a condenser microphone. If you use a condenser microphone
while running the unit on AA batteries (NiMH rechargeable or
alkaline), the operation time will be shortened.

If you need to operate the unit for a long time, use a TASCAM
PS-P515U AC adaptor or TASCAM BP-6AA external battery box
(both sold separately) to power the unit.

TASCAM DR-60DMKII

22

Картинка с сайта: manualmachine.com

3 – Preparation

Using an AC adaptor (sold separately)

Connect the TASCAM PS-P515U AC adaptor (sold separately) and the
USB cable to the USB port of the unit as shown in the illustration.

AC outlet

TASCAM
PS-P151U
(sold separately)

Mini-B USB plug

NOTE

When both batteries are installed and the AC adaptor is
connected, power will be supplied from the AC adaptor.

CAUTION

•

Never use any adaptor other than the designated TASCAM
PS-P515U AC adaptor (sold separately). Use of a different adaptor
could cause malfunction, fire or electric shock.

•

Noise may occur when recording with a microphone if the unit
is too close to the AC adaptor. In such a case, keep sufficient
distance between the AC adaptor and the unit.

Using an external battery pack (sold separately)

Connect a TASCAM BP-6AA external battery pack (designed for use
with this unit and sold separately) to the recorder with the included
USB cable as shown in the illustration. For details, see the BP-6AA
Owner’s Manual.

TASCAM BP-6AA
(sold separately)

Mini-B USB plug

CAUTION

The DR-60DMKII cannot detect the remaining battery charge of a
BP-6AA. If you use a BP-6AA to operate the DR-60DMKII without
batteries in the recorder itself, the unit might stop operating
suddenly if the battery pack runs out of charge. In order to avoid
problems, put batteries with sufficient charge into the DR-60DMKII
before connecting and using a BP-6AA.

TASCAM DR-60DMKII

23

Картинка с сайта: manualmachine.com

3 – Preparation

Using USB bus power

Connect the unit to a PC using the attached USB cable as shown in
the illustration.

Computer

USB

Mini-B USB plug

The

USB SELECT

power for power supply or connection with a PC through the USB
cable when USB cable is connected after the unit is turned on or
when the unit is turned on after connecting the USB cable. Turn the
DATA dial to select
power supply from the USB port. The Home Screen will appear.

NOTE

Power is supplied from the USB port if the USB cable is connected
to the unit that contains batteries (USB bus power prioritized).

screen appears to choose between USB bus

BUS POWER

and press the DATA dial to select

CAUTION

•

Depending on the USB bus power specifications of the computer,
this unit might not function when connected to the computer by
USB cable. In this case, use a TASCAM PS-P515U AC adaptor (sold
separately) or batteries.

•

This unit does not support computer power conservation and
sleep functions. When powering the unit using the USB bus power
of a computer, always turn such functions off.

TASCAM DR-60DMKII

24

Картинка с сайта: manualmachine.com

3 – Preparation

Turning the power on and off (putting it in
standby)

CAUTION

•

The unit goes in standby mode if shut down when the unit is
operating on AC power supplied through the TASCAM PS-P515U
AC adaptor (sold separately), or bus power supplied from a USB
port of a PC.

•

Turn down the volume of the sound system connected to the unit
before starting up or shutting down (standby) the unit.

•

Do not use headphones when starting up or shutting down
(standby) the unit. Otherwise, a large noise would cause damage
to headphones or your ears.

Starting up the unit

To start up the unit from the stopped state, press and hold the ¤
button until
the display. The Home Screen appears when the unit starts up.

TASCAM DR-60DMKII

Start -Up Screen Home Screen

(start-up screen) is displayed on

CAUTION

When the unit is started up for the first time (or when the built-in
clock is reset after being left unused without batteries), the

DA TE/TIME

the date and time. (See “Setting the date and time” on page 26.)

screen appears before the start-up screen to adjust

Shutting down (putting the unit in standby)

Press and hold the ¤ button until
appears on the display.

The power turns off after the unit completes its shutdown (standby)
process.

CAUTION

Always use the ¤ button to shutdown (standby) the unit.
Do not remove the batteries or disconnect the power cable (AC

adaptor TASCAM PS-P515U or USB cable) accidently while the
unit is operating. If you do so, the unit cannot shut down properly
and all recordings, settings and other data will be lost. Lost data
cannot be restored.

LINEAR PCM RECORDER

TASCAM DR-60DMKII

25

Картинка с сайта: manualmachine.com

3 – Preparation

Resume function

The unit has resume function. When started up, the unit is located to
the position (time) where it left off when shut down previously.

If the Playback (7) button is pressed after start-up, the file the
unit was playing when shut down (standby) previously starts to be
played from the position (time) where the unit left off when shut
down.

NOTE

The required data are stored in the SD card. The resume function
does not work if the card is exchanged or formatted.

Setting the date and time

Using its internal clock, this unit remembers the date and time when
a file is recorded.

1. Press the MENU button to open the

2. Turn the DATA dial to select

/ button to open the

The

OTHERS

screen opens.

OTHERS

MENU

screen.

OTHERS

, and press the DATA dial or

screen.

TASCAM DR-60DMKII

26

Картинка с сайта: manualmachine.com

3 – Preparation

3. Turn the DATA dial to select
dial or / button.

The

DA TE/TIME

4. Press the DATA dial or the . and / buttons to move the
cursor, and turn the DATA dial to change the value.

5. Press the MENU button or . button to confirm the change
and return to the

NOTE

You can set the unit to automatically add the date to file names.
(See “Setting the format of file names” on page 78.)

CAUTION

•

The date and time setting can only be maintained for a few
minutes if the battery power becomes low and the unit is not
powered by a TASCAM PS-P515U AC adaptor (sold separately)
or USB cable. When using batteries, replace them before they
completely lose power.

screen opens.

OTHERS

DA TE/TIME

screen.

, and press the DATA

Inserting and removing SD cards

Inserting the SD card

1. Open the SD card slot/USB port cover on the right side of the
unit.

2. Insert the SD Card into the slot as shown in the following illus­tration until it clicks into place.

Removing the card

1. Open the SD card slot/USB port cover on the right side of the
unit.

TASCAM DR-60DMKII

27