Polar stride sensor bluetooth smart инструкция

POLAR 91053153 Stride Sensor Bluetooth Smart User Manual

Картинка с сайта: manualspro.net

INTRODUCTION

Polar Stride Sensor Bluetooth® Smart is the best choice for improving your
running technique and efficiency. Using sensitive inertial sensors, it gives
accurate and highly responsive speed, distance, leg cadence and stride length
measurements.

Polar Stride Sensor Bluetooth® Smart is compatible with Bluetooth® Smart Ready
devices that support Bluetooth® Running Speed and Cadence Service.

You can use your sensor with dozens of leading fitness apps as well as with
Polar products using Bluetooth® Smart.

Check the compatible products at
support.polar.com.

Картинка с сайта: manualspro.net

GET STARTED

STRIDE SENSOR BATTERY

REMOVING THE BATTERY INSULATOR

Remove the battery insulator from the battery compartment before first use.

1. Open the battery cover by turning it counterclockwise using a coin.
2. Remove the red plastic insulator from the battery compartment.
3. Press the cover into place and close it by turning it clockwise

CHANGING THE BATTERY

1. Open the battery cover by turning it counterclockwise to OPEN using a coin (picture 1).
2. Place the battery inside the cover with the positive (+) side facing the cover (picture 2). Make sure the sealing ring is in the groove to ensure water resistance.
3. Place the cover with the battery inside it into the sensor.
4. Press the cover in place and close it by turning clockwise from OPEN to CLOSE using a coin (picture 3)

To increase battery life, Polar Stride Sensor Bluetooth® Smart has three
different power modes: Measuring, Stand By and Deep Sleep mode. In Stand By
mode, the sensor is visible to the receiving device and a connection is
possible. When connected to the receiving device, the sensor goes to Measuring
mode. When disconnected, the sensor returns to Stand By mode. If the sensor is
not touched during the next couple of minutes, it goes to Deep Sleep mode. The
slightest movement will make the sensor return to Stand By mode.

PAIRING AND CALIBRATING THE STRIDE SENSOR

PAIR THE STRIDE SENSOR WITH YOUR RECEIVING DEVICE

Polar Stride Sensor Bluetooth® Smart must be paired with the receiving device
in order to analyze your running technique and efficiency. For more
information, see the user guidance material of the receiving device or mobile
application

CALIBRATE THE STRIDE SENSOR

Calibration of the stride sensor improves the accuracy of speed, pace,
distance and stride length measurements. It is recommended that you calibrate
the stride sensor before using it for the first time, if there are significant
changes in your running style, or if the position of the stride sensor on the
shoe is dramatically changed (e.g. if you have new shoes or if you switch the
sensor from your right shoe to your left one). The calibration should be done
at the speed you normally run.

Calibration is done via the receiving device. See the user guidance material
of the receiving device or mobile application for instructions.

ATTACHING THE STRIDE SENSOR

Attach the stride sensor on shoelaces:

1. Undo your shoelaces and place the holder on top of the tongue of the shoe. Make sure the holder flap is facing upwards.
2. Thread the laces in through the holes on the sides of the holder and out through the hole on the bottom of the holder (pictures 1 and 2). Thread the laces through the small flap on the tongue of the shoe to ensure the holder does not move while running.
3. Tighten the laces.
4. Fit the front part of the sensor into the holder and press from the rear (picture 3). Fasten the flap.
5. Make sure the sensor does not move and is aligned with your foot. The more secure the sensor, the more accurately speed and distance is measured.

Картинка с сайта: manualspro.net

IMPORTANT INFORMATION

SERVICE

During the two-year guarantee/warranty period we recommend that you have
service, other than battery replacement, done by an authorized Polar Service
Center only. The warranty does not cover damage or consequential damage caused
by service not authorized by Polar Electro. For contact information and all
Polar Service Center addresses, visit
www.polar.com/support and country-specific
websites.

Changing batteries: To change the batteries of the stride sensor yourself,
follow the given instructions. To ensure the maximum lifespan of the battery
cover, open it only when changing the battery. When changing the battery, make
sure the sealing ring is not damaged, in which case you should replace it with
a new one. You can purchase the sealing ring/battery kits at well-equipped
Polar retailers and authorized Polar Services. In the USA and Canada, the
additional sealing rings are available at authorized Polar Service Centers. In
the USA, the sealing ring/battery kits are also available at
www.shoppolar.com. Go to www.polar.com to find
your own country’s shoppolar online store.

The battery level of your stride sensor is displayed on the receiving device
if it supports Bluetooth® Battery Service.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of
batteries according to the instructions.

Keep batteries away from children. If swallowed, contact a doctor immediately.
Batteries should be properly disposed of according to local regulations.

CARE AND MAINTENANCE

Your safety is important to us. The shape of the stride sensor is designed to
minimize the possibility of getting caught in something. In any case, be
careful when running with the stride sensor in brushwood, for example.

The stride sensor is water resistant and can be safely worn in the rain. Do
not immerse the stride sensor in water as it is not intended for underwater
activities. Do not expose to direct sunlight for extended periods.

Keep your stride sensor in a cool and dry place. Do not keep in a damp
environment, in non- breathable material (a plastic bag or a sports bag) nor
with conductive material (a wet towel).

TECHNICAL SPECIFICATIONS

• Battery life: Average 600 hours of use
• Battery type: CR2430
• Battery sealing ring: O-Ring 25.0 x 1.2, material silicone
• Operating temperature: -10 °C to +50 °C / 14 °F to 122 °F
• Accuracy: ±3 % or better once calibrated, definition applies to stable conditions
• Bluetooth QD ID : B020404

This product is protected by the incorporeal rights of Polar Electro Oy as
defined by the following documents: US6584344.

LIMITED INTERNATIONAL POLAR GUARANTEE

• Polar Electro Oy issues a limited international guarantee for Polar products. For products which have been sold in the USA or Canada, guarantee is issued by Polar Electro, Inc.
• Polar Electro Oy/Polar Electro Inc. guarantees the original consumer/purchaser of the Polar product that the product will be free from defects in material or workmanship for two (2) years from the date of purchase, with the exception of wristbands made of silicone or plastic, which are subject to a guarantee period of one (1) year from the date of purchase.
• The guarantee does not cover normal wear and tear of the battery, or other normal wear and tear, damage due to misuse, abuse, accidents or non-compliance with the precautions; improper maintenance, commercial use, cracked, broken or scratched cases/displays, textile armband or textile or leather wristband, elastic strap (e.g. heart rate sensor chest strap) and Polar apparel.
• The guarantee does also not cover any damage/s, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the product.
• Guarantee does not cover products which have been purchased second hand.
• During the guarantee period, the product will be either repaired or replaced at any authorized Polar Central Service regardless of the country of purchase.
• Guarantee issued by Polar Electro Oy/Inc. does not affect the consumer’s statutory rights under applicable national or state laws in force, or the consumer’s rights against the dealer arising from their sales/purchase contract.
• You should keep the receipt as a proof of purchase!
• Guarantee with respect to any product will be limited to countries where the product has been initially marketed by Polar Electro Oy/Inc.

Manufactured by Polar Electro Oy, Professorintie 5, 90440 KEMPELE, Finland
www.polar.com.

Polar Electro Oy is a ISO 9001:2015 certified company.

© 2021 Polar Electro Oy, 90440 KEMPELE, Finland. All rights reserved. No part
of this manual may be used or reproduced in any form or by any means without
prior written permission of Polar Electro Oy.

The names and logos in this user manual or in the package of this product are
trademarks of Polar Electro Oy. The names and logos marked with a ® symbol in
this user manual or in the package of this product are registered trademarks
of Polar Electro Oy. Windows is a registered trademark of Microsoft
Corporation and Mac OS is a registered trademark of Apple Inc. The Bluetooth®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Polar Electro Oy is under license.

This product is compliant with Directives 2014/53/EU, 2011/65/EU and
2015/863/EU. The relevant Declaration of Conformity and other regulatory
information for each product are available at
www.polar.com/en/regulatory_information.

This crossed out wheeled bin marking shows that Polar products are electronic
devices and are in the scope of Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and electronic equipment
(WEEE) and batteries and accumulators used in products are in the scope of
Directive 2006/66/EC of the European Parliament and of the Council of 6
September 2006 on batteries and accumulators and waste batteries and
accumulators. These products and batteries/accumulators inside Polar products
should thus be disposed of separately in EU countries. Polar encourages you to
minimize possible effects of waste on the environment and human health also
outside the European Union by following local waste disposal regulations and,
where possible, utilize separate collection of electronic devices for
products, and battery and accumulator collection for batteries and
accumulators.

DISCLAIMER

• The material in this manual is for informational purposes only. The products it describes are subject to change without prior notice, due to the manufacturer’s continuous development program.
• Polar Electro Inc./Polar Electro Oy makes no representations or warranties with respect to this manual or with respect to the products described herein.
• Polar Electro Inc./Polar Electro Oy shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material or the products described herein.

References

• Support | Polar Global
• Heart Rate Monitors, fitness trackers and sports watches | Polar Global
• Support | Polar Global
• shoppolar.com
• Support | Polar Global
• Heart Rate Monitors, fitness trackers and sports watches | Polar Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>