Фотоаппарат самсунг 5х инструкция по применению на русском

Quick Links

PL50

Thank you for buying a Samsung Camera.

This manual will help you learn to capture

images, share or print your photos, and edit

photos with the accompanying software.

Please read this manual thoroughly.

User Manual

• Page 1
  PL50 Thank you for buying a Samsung Camera. This manual will help you learn to capture images, share or print your photos, and edit photos with the accompanying software. Please read this manual thoroughly. User Manual…

• Page 2: Getting To Know Your Camera

  Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung takes no responsibility for any loss or damage that may result from camera malfunction.

• Page 3
  fire, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
• Page 4
  Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in fire or injury. — Use battery with the correct specification for the camera. — Do not short circuit, heat or dispose of battery in fire.

• Page 5: Table Of Contents

  Contents How to use the Movie clip mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) How to use the Smart Auto mode Things to Watch Out for When Taking Pictures Using the camera buttons to set the camera POWER button SHUTTER button ZOOM button…

• Page 6
  Contents Setting up the Date / Time / Date type Time Zone File name Imprinting the recording date Auto power off Selecting Video out type Auto Focus lamp Setting the USB Starting play mode PLAY Playing back a still image Playing back a movie clip Movie clip capture function Playing back a recorded voice…
• Page 7
  Contents Software Notes SOFTWARE System Requirements About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC…

• Page 8: System Chart

  Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from optional equipment, contact your nearest Samsung dealer or Samsung service centre.

• Page 9
  Identification of features Front & Top Shutter button Speaker AF sensor / Self-timer lamp Power button Microphone Flash Lens/ Lens cover…

• Page 10: Identification Of Features

  Identification of features Back LCD monitor Camera status lamp MENU button 5 function button Play mode button Fn / Delete button Zoom Tele(T) button / Digital zoom Zoom Wide(W) button / Thumbnail Strap eyelet USB / AV / DC terminal Mode Dial…

• Page 11
  Identification of features Bottom Memory card slot Battery chamber cover Tripod socket 5 Function button Battery chamber Left button Battery holder Information / Up button Flash / OK / Play & Pause button Macro / Down button Self-timer / Right button…
• Page 12
  Identification of features Self-timer lamp Icon Status Description — For the first 8 seconds, the lamp blinks at 1 second intervals. Blinking — For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. For the 2 seconds, the lamp blinks quickly at Blinking 0.25-second intervals.

• Page 13: Recover At Normal Temperature

  Movie Approx. 120 MIN 640×480 image size 30fps frame rate These figures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods. Important information about battery usage. When camera is not in use, turn off the power.

• Page 14: Connecting To A Power Source

  Connecting to a Power Source Important information about USB cable usage. Use a USB cable with the correct specification. If the camera is connected to the PC through a USB hub : connect the camera directly to the PC. If the camera and other devices are connected to the PC at the same time : remove other device.

• Page 15: The Lcd Monitor

  Connecting to a Power Source Insert the battery as shown — If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -). — When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it.

• Page 16: Instructions On How To Use The Memory Card

  — If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. Samsung cannot be held responsible for lost data. It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc.

• Page 17
  Instructions on how to use the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). Card pins Write protect switch Label [SD (Secure Digital) memory card] The SD/SDHC memory card has a write protect switch that prevents image files from being deleted or formatted.
• Page 18
  When using the camera for the first time Charge the rechargeable battery fully before using the camera for the first time. When the camera is turned on for the first time, a menu will be displayed in the LCD monitor to set date, time and language. This menu will not be displayed again after setting up the date, time and language.
• Page 19
  LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. [Image & Full Status] Description Recording mode Optical / Digital Zoom bar / Digital Zoom rate Voice Memo Number of available shots remaining Remaining time Internal memory icon Face Detection ·…

• Page 20: How To Use The Menu

  How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. 2. Use the up or down buttons to navigate through the menus. Face Detection Photo Size Functions Quality Sound Focus Area Display…

• Page 21
  Starting the recording mode Selecting modes You can select the shooting modes by using the mode dial on the upper of your camera. How to use the mode dial Select the shooting mode by turning the mode dial to the selection point.

• Page 22: Starting The Recording Mode

  Starting the recording mode How to use the Program mode ( Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Select the Program mode by using the Mode dial.

• Page 23
  Starting the recording mode Using the Photo Help guide mode ( Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur. This also enables the user to practice the best way to take the pictures. Photo Help Guide Photo Help Guide Features to use when the image is out of focus…
• Page 24
  Starting the recording mode How to use the Beauty Shot mode ( Take a photo of portraits by setting options to clear facial imperfections. 1. Select the Beauty Shot mode by using the Mode dial. (p.20) 2. Press the Up/Down button in [Functions] menu to select [Face Tone] or [Face Retouch].
• Page 25
  Starting the recording mode How to use the [Frame Guide] mode Set [Frame Guide] mode when you want someone else to take a picture for you from the angle you choose. 1. Take a picture from the angle you choose. — A guide appears round the sides of the picture.

• Page 26: How To Use The Movie Clip Mode

  Starting the recording mode How to use the Movie clip mode ( A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the Movie clip mode by using the Mode dial. (p.20) 2.

• Page 27: How To Use The Smart Auto Mode

  Starting the recording mode How to use the Smart Auto mode( The camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. 1.

• Page 28: Things To Watch Out For When Taking Pictures

  Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] The available memory capacity may vary depending on shooting conditions and camera settings.

• Page 29: Using The Camera Buttons To Set The Camera

  Using the camera buttons to set the camera The recording mode function can be set up by using the camera buttons. POWER button Used for turning the camera’s power on / off. If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life.

• Page 30
  ZOOM button WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.

• Page 31: Info (Disp) / Up Button

  Info (DISP) / Up button While the menu is showing, the Up button operates as a direction button. In the recording modes or playback mode, pressing this button will display the image information. Show all photographic information. [Filming screen] Macro ( While the menu is showing, the DOWN button operates as a direction button.

• Page 32
  Macro ( ) / Down button Types of focus mode and focus range (W : Wide, T : Tele) Mode Auto ( Focus Type Auto macro ( W : 5~ Infinity Focus range T : 50 ~ Infinity Mode Program ( Focus Type macro ( W : 5 ~ 80…

• Page 33: Focus Lock

  Focus lock To focus on a subject not positioned in the centre of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject.

• Page 34
  Flash ( ) / Left button If you press the shutter button after selecting the flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires.

• Page 35: Self-Timer / Right Button

  Flash ( ) / Left button Available flash mode, by recording mode Mode SCENE Mode Smart Auto Flash ( ) icon will appear in [Smart Auto] mode. Self-timer ( When the menu is displayed on the LCD monitor, pressing the Right ( o : Selectable) button makes the cursor shift to the right tab.

• Page 36
  Self-timer ( ) / Right button Selecting the self-timer 1. Select a Recording mode with the exception of Voice recording mode.(p.20) 2. Press the SELF-TIMER / RIGHT ( button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor.

• Page 37: Menu Button

  MENU button — When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. — A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode.

• Page 38: How To Enable Functions Using The Menu Button

  Functions ( How to Enable Functions Using the MENU Button 1. Press the MENU button in an available mode. 2. Press the Up / Down button to select the [Functions] menu and press the Right/OK button. White Balance Functions Sound Face Detection Right/OK Display…

• Page 39: White Balance

  Functions ( White balance The white balance control allows you to adjust the colours to appear more natural. Mode Icon The camera automatically selects the ap- Auto WB propriate white balance settings, depending on the prevailing lighting conditions. Daylight For taking images outside. For taking images under a cloudy and over- Cloudy cast sky.

• Page 40: Iso

  Functions ( You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers. [Auto] : The camera’s sensitivity is automatically changed by variables such as lighting value or subject brightness. [ISO 80, 100, 200, 400, 800, 1600 ] : You can increase the shutter speed while the same amount of light is present, by…

• Page 41
  Functions ( This function can detect up to 10 persons. When the camera recognises many people at the same time, it will focus on the nearest person. The Digital zoom is not activated in this mode. When the camera detects a target face, the white colour focus frame will be displayed over the target face and the grey colour focus frame appears over the remaining faces.

• Page 42: Face Tone

  Functions ( Smile Shot The camera automatically takes a picture by detecting the face of the subject although you don’t press the shutter button. If you press the Shutter button, the picture is taken in the normal way. When taking a picture of smile shot, showing teethes or keeping the smiley face of your subject helps detecting the smile face of the subject.

• Page 43: Image Size

  Functions ( Image Size You can select the image size appropriate for your application. Icon Still image 3648X 3648X 3648X mode Size 2736 2432 2052 Movie Icon clip mode 640 x 480 Size Set the photo size. Photo Size Back Move [ STILL IMAGE mode ] The higher the resolution, the lower the number of shots…

• Page 44: Acb

  Functions ( This function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly. — [ACB] Sub menus: [Off], [On] The ACB function is available in [Auto], [Program] or [Portrait] recording mode.

• Page 45: Drive Mode

  Functions ( Drive mode You can select continuous shot, and AEB (Auto Exposure Bracketing). [Single] ( : Take one picture only. [Continuous] ( ) : Images will be taken continuously until the shutter button is released. [Motion Capture] ( : This takes 5 shots per second, when the shut- ter is pressed and held down.

• Page 46: Photo Style Selector

  Functions ( Photo Style Selector You can add various effects to the image without using image editing software. 1. Select the desired Photo style selector by pressing the Left/Right button and press the OK button. 2. Press the Shutter button to take an image. Style mode Icon Normal…

• Page 47: Image Adjust

  Functions ( Image Adjust Contrast You can change the contrast of the image. 1. Select [Contrast] by pressing the Up/Down button. 2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to take an image. When Negative in photo style is set, contrast is not available. Sharpness You can adjust the sharpness of the picture you are about to take.

• Page 48: Voice Memo

  Functions ( Voice Memo You can add your voice-over to a stored still image. (Max. 10 sec.) — If the voice memo indicator is displayed on the LCD monitor, the setting is completed. — Press the shutter button and take a picture.

• Page 49: Recording The Movie Clip Without Voice

  Functions ( Pausing while recording a voice Using this function, you can record your favourite voice clips into a voice recording file without having to create multiple voice recording files. 1. Press the OK button to pause recording. 2. Press the OK button again to resume the recording. 3.

• Page 50: Sound Menu

  Sound menu In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by * are default settings. Menus are subject to change without prior notice. Sound ( Volume You can select a volume of start up sound,…

• Page 51: Af Sound

  Sound ( AF sound If you set AF sound to on, AF sound will be activated when the Shut- ter button is pressed down half way so that you can be aware of the camera operation status. — [AF sound] sub menu : [Off], [On]* Self Portrait This occurs when it automatically detects the location of the subject’s face when taking a self-portrait.

• Page 52: Start Up Image

  Display ( Start up image You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. — Sub menus : [Off]*, [Logo], [User Image] — Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode.

• Page 53: Settings

  Settings ( Formatting a memory This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. — Sub menus [Yes] : A window for confirming the selection displays.

• Page 54: Setting Up The Date / Time / Date Type

  Settings ( Setting up the Date / Time / Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD monitor when travelling overseas.

• Page 55: Imprinting The Recording Date

  Settings ( Imprinting the recording date There is an option to include DATE / TIME on still images. — Sub menus [Off]* : The DATE & TIME will not be imprinted on the image file. [Date] : Only the DATE will be imprinted on the image file.

• Page 56: Selecting Video Out Type

  Settings ( Selecting Video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

• Page 57: Auto Focus Lamp

  Settings ( Auto Focus lamp You can turn on and off the Auto Focus lamp. — Sub menus [Off] : The AF lamp will not light up in low light conditions. [On]* : The AF lamp will light up in low light conditions.

• Page 58: Playing Back A Still Image

  Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card.

• Page 59: Movie Clip Capture Function

  Starting play mode Movie clip capture function You can capture still images from the movie clip. How to capture the movie clip 1. Press the OK button while playing the movie clip. Then press the Down button. 2. The paused movie clip is saved in a new file name.

• Page 60: Lcd Monitor Indicator

  LCD monitor Indicator The LCD monitor displays shooting information about the displayed image. Description Playback mode Voice Memo DPOF Protect Folder name & File name Memory card indicator Battery Aperture value F2.8 ~ F16.5 Shutter speed Flash Image size 3648×2736 ~ 320×240 Recording date Icon Page…

• Page 61: Using The Camera Buttons To Set The Camera

  Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( ) / Enlargement ( Smart Album You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image.

• Page 62: Thumbnail / Enlargement Button

  Thumbnail ( ) / Enlargement ( ) button Details of Each Category Category Description Categorized depending on the file type (e.g., Type picture, video, or voice) Categorized depending on the sequence of Date recorded dates. Colour Categorized depending on the main color. Categorized depending on the sequence of Week recorded weeks.

• Page 63: Info (Disp) / Up Button

  Info (DISP) / Up button When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. Info (DISP) button Info (DISP) button Play &…

• Page 64: Left / Right / Down / Menu Button

  Left / Right / Down / MENU button LEFT / RIGHT / DOWN / MENU buttons activate the following. — LEFT button : While the menu is showing, the LEFT button operates as a direction button. While the menu is not showing, press the LEFT button to select the previous image.

• Page 65: Setting Up The Play Back Function Using The

  Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as fol- lows.

• Page 66: Setting Up The Play Back Function Using The Lcd Monitor

  Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu Tab Main Menu Sub Menu One Photo Images All Photos…

• Page 67: Edit

  Edit ( Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the MENU button. 2. Click the Up/Down button from the Edit menu to select [Resize] ( menu tab and press the OK button.

• Page 68: Rotating An Image

  Edit ( After using [Edit] feature, the edited image will be saved at a smaller size than original image. (Only with image size from 7M) Rotating an image You can rotate the stored images by various degrees. 1. Press the play mode button and press the MENU button.

• Page 69: Image Adjust

  Edit ( Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image. — OK button : Select / setup the Custom Colour — Up / Down button : Selects R, G, B — Left / Right button : Change the values Image Adjust 1.

• Page 70
  Edit ( Brightness control You can change the brightness of the image. 1. Select ( ) by pressing the Left/Right button and press the OK button. Then a bar for selecting the brightness will be displayed. 2. Change the brightness by pressing the Left/Right button.

• Page 71: View

  View ( You can view the thumbnails and easily categorize or search a large amount of content such as pictures and videos. 1. Press the MENU button in playback mode. 2. Press the Up/Down button to select the desired menu. 3.

• Page 72: Selecting Images

  Starting the Multi Slide Show ( Selecting Images You can select image to view 1. Use the Up / Down buttons to select the [Images] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [All] : All images saved in the Memory are played back.

• Page 73: Setting Play Interval

  Starting the Multi Slide Show ( Setting play interval Set the Multi Slide Show play interval. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval.

• Page 74: Protecting Images

  File Options ( Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera’s internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card.

• Page 75: Dpof

  File Options ( DPOF DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back.

• Page 76
  File Options ( Index Images (except for movie clips and voice file) are printed as index type. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Select the [Index] menu and press the Right button again.

• Page 77: Copy To Card

  File Options ( Copy To Card This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy To Card] menu tab by pressing the Up / Down button. And then press the Right button.

• Page 78: Pictbridge

  PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Setting up the camera for connection to the printer 1.

• Page 79: Pictbridge : Picture Selection

  PictBridge : Picture Selection You can select images you want to print. Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. 2. Use the Up / Down buttons to select the [Images] menu and press the Right button.

• Page 80: Pictbridge : Reset

  PictBridge : Reset Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button.

• Page 81
  — Take a picture for testing the camera condition and prepare extra battery. — Samsung cannot be held responsible for camera malfunctions. If the digital camera is not used for a long period, the date and time may adopt the default settings by automatical battery discharged.

• Page 82: Warning Indicator

  Warning indicator There are several warnings that may appear on the LCD display. [Card Error] Memory card error Turn off the camera power and turn it on again Insert the memory card again Insert and format the memory card (p.52) [Card Locked] The memory card is locked SD/SDHC memory card : Slide the write protect switch to the…

• Page 83: Before Contacting A Service Centre

  Before contacting a service centre Please check the following The camera doesn’t switch on There is low battery capacity Insert fresh batteries. (p.14) Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use The battery is exhausted Insert fresh batteries.

• Page 84
  Before contacting a service centre The flash does not fire Flash off mode has been selected Dis-engage flash off mode The camera mode can’t use the flash Refer to the FLASH instruction (p.32) Incorrect date and time is displayed The date and time have been set incorrectly or the camera has adopted the default settings Reset the date and time correctly The camera buttons do not operate…

• Page 85: Specifications

  — Effective Pixel : Approx. 10.2 Mega-pixel — Total Pixel : Approx. 10.3 Mega-pixel Lens — Focal Length : SAMSUNG Lens f = 6.2 ~ 18.6mm (35mm film equivalent : 35 ~ 105mm) — F No. : F2.8(W) ~ F5.2(T) — Digital Zoom : ·Still Image mode :1.0X ~ 3.0X…

• Page 86
  Super Fine About 182 About 199 About 251 About 251 About 333 About 493 About 1234 Fine Normal About 471 About 510 About 611 About 617 About 791 About 1064 About 1870 These figures are measured under Samsung standard conditions and may vary depending on shooting conditions and camera settings. Effect…

• Page 87: Software

  — Approx. 116.1g (without batteries and card) Operating Temperature — 0 ~ 40°C Operating Humidity — 5 ~ 85% Software — Samsung Master, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners. (1050mAh)

• Page 88: Software Notes

  — Using a Hand-made PC or a PC and OS that has not been guaran- teed by the manufacturer is not covered by the Samsung warranty. — Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).

• Page 89: About The Software

  After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software.

• Page 90: Setting Up The Application Software

  Click the [Samsung Digital Camera Installer] menu in the Auto run frame. 2. Install DirectX, Samsung Master by selecting a button shown on the monitor. If a recent version of DirectX has been installed on your computer, DirectX may not be installed.

• Page 91
  Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP/ Vista, an image viewer program will open.

• Page 92: Starting Pc Mode

  Setting up the application software PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Windows explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. Install Adobe Reader from the CD provided.

• Page 93
  Starting PC mode Connecting the camera to a PC Disconnecting the camera and PC Refer to page 94 (Removing the removable disk). Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 1.
• Page 94
  7. An image file is transferred from the camera to your PC. — By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.

• Page 95: Removing The Removable Disk

  Removing the removable disk Windows 2000/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on.

• Page 96: Samsung Master

  Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start Programs Samsung Master]. Downloading images 1. Connect the camera to your PC.

• Page 97
  Image display window : A selected image displays in this window. Preview window : You can preview the changed image. A still image edited with Samsung Master can’t be played back on the camera. Refer to the [Help] menu in Samsung Master for further information.
• Page 98
  Frame display window : You can insert multi media in this window. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Sam- sung Master. Refer to the [Help] menu in Samsung Master for further information.

• Page 99: Setting Up The Usb Driver For Mac

  Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is com- patible with MAC OS 10.3. 3.

• Page 100: Faq

  Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager.

• Page 101: Correct Disposal Of Batteries In This Product

  If the movie clip can’t be deleted, or the removable disk can’t be extracted or an error message displays during the file transfer. If you install only the Samsung Master, the problems mentioned above occasionally happen. — Close the Samsung Master program by clicking the Samsung Master icon on the Taskbar.

• Page 102: Correct Disposal Of This Product

  This product should not be mixed with other commercial waste for disposal. Samsung Eco-mark It is Samsung’s own symbol mark is used to effectively communicate Samsung’s environmental friendly prod- uct activities to the consumers. The mark represents Samsung’s continuous effort on development of envi-…